Tyco T210+ IR Test Source (Flame Detector Tester) 592.001.016

The Tyco T210+ 592.001.016 infra-red test source used to test Thorn Security S200 and S200+ Series of infra-red flame detectors in both safe and hazardous areas.

With the Tyco T210+ 592-001-016 infra-red tester, IR flame alarms can be tested. The T210+ consists of a module mounted in a cradle which can be hand held or secured to an extendable pole. The module is self-aligning on the detector by means of an adaptor secured to the front of the cradle. The assembly is held against the detector to check the response time and sensitivity of the detector.

Tyco T210+ IR tester powered from an intrinsically safe power circuit. Infra-red energy directed at the alarm by a lamp through a Fresnel lens and a sapphire glass window. ATEX-approved for areas in Zones 1 and 2 for gases in Group IIC or less serious hazards, classified from T1 to T4.

Suitable for testing the IR flame alarm in Tyco Series 800, S2xx, FV3xx and FV4xx.

Ordering Information:

• 592.001.016 : T210+ Test Source Flame Detector Tester (IR Tester For Flame Alarms)
• 592.001.014 : Adapter plate for Series S200, S200 Plus, FV3xx/4xx flame detectors
• 592.001.018 : Adapter plate for Series 800 flame detectors
• 592.001.010 : Nicad battery and charger kit
• 517.001.230 : Solo 100 telescopic extension pole set
• 517.001.226 : Solo 101 extension pole
• 517.001.224 : Solo 704 adaptor tube B
• 517.001.264 : Solo 610 Carryall bag

Key features include:

• Certified against EN50014, EN50019 (Increased Safety ‘e’) and EN50020 (Intrinsic Safety ‘i’)
• Certified against BS EN 60079-0 and EN 50020
• ATEX/IECEx approved for use in zone 1 and 2 areas (GPIIC gases)
• Ingress protection IP54
• Test source for fast testing
• Test wide range of flame detectors
• Product Code: T210+ (592.001.016)

How to order (Specify Model): Select T210+ (592.001.016)