Salwico IR Test Lamp (Flame Detector Tester) 5100553-00A
The Salwico 5100553-00A IR test lamp is used to perform function test on Salwico IR flame detectors. The extension rod (1.4m – 4.0m) makes it possible to easily test the detector in all environments.
Two ways to test the flame detector with Salwico 5100553-00A IR test lamp.
a) Press the 5100553-00A tester against the detector until the detector cause the tripping of the test initiation switch with an intermittent buzzer sounds. After about 15-30 seconds, check if the flame detector has operated.
b) Set the manual test switch located on the top of the 5100553-00A device to “ON” position to cause a continuous intermittent buzzer sound. Hold the tester close to the detector so the distance between the detector and the device is within 5 cm. If the detector operates within 30 seconds under this condition, the detector is normal. If the is no response after 30 seconds in any of those tests there may be a problem with the detector or the tester itself.
The Salwico IR test lamp is compatible to the following detectors:
Key features include:
- High-access testing with extension rod 1.4 m – 4.0 m
- Test source for fast testing
- Test wide range of flame detectors
- Product Code: 5100553-00A
Where To Buy | Global Sales and Support. Dedicated to advancing safety worldwide. Contact Us