The Power to Protect
When electrical equipment is used in, around, or near an atmosphere that has flammable gases or vapors, flammable liquids, combustible dusts, ignitable fibers or flyings, there is always a possibility or risk that a fire or explosion might occur. Those areas where the possibility or risk of fire or explosion might occur due to an explosive atmosphere and/or mixture is often called a hazardous (or classified) location/area.
Intrinsically Safe Flame Detectors
Tyco offers a range of specialist Flame Detectors for use in standard applications and hazardous areas. The range includes the FLAMEVision FV300 array-based infrared flame detector, the FV400 Triple IR flame detectors and a selection of other point detectors.
FLAMEVision Array Based Infrared Flame Detectors
FLAMEVision FV300 uses Infra-Red Array based sensing technology to provide the ultimate programmable flame detector. An array of 256 infra-red sensors plus two optical channels view the protected area.
FLAMEVision FV400 Triple IR Flame Detector
These FLAMEVision detectors use Triple IR Solar Blind sensing technology and flame detection algorithms to provide high performance sensing capabilities for hydrocarbon fires.
601FEx Flame Detectors
The 601FEx is a full featured intrinsically safe solar blind flame detector for indoor use and boasts a high degree of false alarm immunity.
801FEx Flame Detectors
The 801FEx is a full featured intrinsically safe solar blind flame detectors for indoor use and boasts a high degree of false alarm immunity.
Flame Detector Test Equipment
There is a wide range of equipment available for testing flame detectors. This range includes test source for use with the Solo range of detector poles, adapters, batteries, chargers and carry cases.
Intrinsically Safe Fire Detectors
Tyco offers a range of intrinsically safe fire detectors. The comprehensive range encompasses both addressable and conventional detectors.
801CHEx Carbon Monoxide + Heat Detector (Addressable)
The 801CHEx is a state-of-the-art intrinsically safe CO and heat detector which allows a full set of detection modes to be implemented in the MZX detection panel to suit most fire and heat detection applications.
801HEx Heat Detector (Addressable)
The 801HEx is a flexible cost-effective addressable intrinsically safe heat detector with all the features of MZX VIRTUAL detectors.
801PHEx Optical Smoke + Heat Detector (Addressable)
The 801PHEx is a state-of-the-art intrinsically safe smoke and heat detector which allows a full set of detection modes to be implemented in the MZX detection panel.
801FEx Flame Detectors (Addressable)
The 801FEx point type flame detector forms part of the MZX Technology® range of digital addressable fire detectors. It is a full featured solar blind flame detector for indoor use and boasts a high degree of false alarm immunity.
MD601Ex & MD611Ex Heat Detectors (Conventional)
The MD601Ex & MD611Ex intrinsically safe heat detectors use two networked thermistors in a bridge configuration to provide a fast response that depends both on absolute temperature and rate of rise of temperature.
MDU601Ex Carbon Monoxide + Heat Detector (Conventional)
The MDU601Ex intrinsically safe detector combines the features of both the MU601Ex detector and the MD601Ex detector to provide a combined CO and Rate-of-Rise Heat detector.
MR601TEx Optical Smoke + Heat Detectors (Conventional)
The MR601TEx is an intrinsically safe detector that combines optical and heat detector technology to detect slow smouldering fires, open flaming fires and clear burning fire products.
601FEx Flame Detectors (Conventional)
The 601FEx is a full featured intrinsically safe solar blind flame detectors for indoor use and boast a high degree of false alarm immunity.
Intrinsically Safe Detector Bases
We offer a range of Intrinsically Safe detector MUBEx bases for use with the addressable and conventional range of fire detectors.
Intrinsically Safe Callpoints
Tyco can supply both addressable and conventional callpoints for use ATEX certified systems. The callpoints are compatible with the MZX range of addressable and conventional controllers.
MZX Intrinsically Safe Addressable Callpoints
The CP830Ex, CP840Ex and CP850Ex are intrinsically safe callpoints designed for use in potentially explosive gas and dust atmospheres.
Intrinsically Safe Conventional Callpoints
The MCP220Ex is a conventional callpoint for use on the ATEX Certified System.
Callpoint Stoppers
The callpoint STOPPER provides protection from malicious or accidental activation of manual callpoints.
Other Intrinsically Safe Equipment
- KFDO-CS-EX1.54 P&F Dual Channel Smart Fire Detector Isolator
- MTL5021 Intrinsically Safe Sounder Driver
- MTL552 Series Solenoid / Alarm Drivers
- MTL5561 Two Channel Fire / Smoke Detector Interface
- XB8 Series Xenon Beacon
- Banshee IS28 Mk6 Intrinsically Safe Sounder
- Type C3 Switchgear Box
Got a question?
